Showing 2001–2040 of 2042 results

VW Corrado Golf 1.8 G60 FCP H-beam steel connecting rods 136mm

482.90
Product detailed specification Manufacturer: FCP Engineering Model: FCPRHVW13650622 Profile: H-beam C to C: 136mm Big end diameter: 50.6mm Pin diameter:

VW Golf 1.8 KR PL Athena MLS cylinder head gasket 81×1.75mm 338461R

152.89
Athena Racing 338-series multilayer steel (MLS) cylinder head gasket. Athena MLS gaskets are designed to suit the requirements of today’s

VW Golf 2.8 2.9 12V VR6 Supertech exhaust valve VWEVN-1010 +1.8mm

30.80
Product detailed specification Model number VWEVN-1010 Head diameter 36.00mm Stem diameter 6.95mm Length 106.95mm Material Black nitrided stainless steel Fits

VW Golf 2.8 24V VR6 forged JE Pistons kit 82mm CR 10.2 279958

1,318.90
Product detailed specification Bore size 82.00mm Stroke 90.30mm JE Pistons compression ratio (CR) 10.2:1 OEM compression ratio (CR) 10.75:1 Dome

VW Golf 2.8 24V VR6 forged JE Pistons kit 82mm CR 8.5 279955

1,318.90
Product detailed specification Bore size 82.00mm Stroke 90.30mm JE Pistons compression ratio (CR) 8.5:1 OEM compression ratio (CR) 10.75:1 Dome

VW Golf 2.8 VR6 24V ARP cylinder head stud kit 204-4VR6

491.70
ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for

VW Golf Corrado 2.8 2.9 12V VR6 Supertech intake valve VWIVN-1007

30.80
Product detailed specification Model number VWIVN-1007 Head diameter 39.00mm Stem diameter 6.97mm Length 105.95mm Material Black nitrided stainless steel Fits

VW Golf Corrado 2.8 2.9 12V VR6 Supertech intake valve VWIVN-1010 +2mm

30.80
Product detailed specification Model number VWIVN-1010 Head diameter 41.00mm Stem diameter 6.97mm Length 105.95mm Material Black nitrided stainless steel Fits

VW Golf, Corrado 2.8 2.9 VR6 12V ARP cylinder head stud kit 204-4705

430.10
ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for

VW JETTA 2.5 20V TFSI Supertech intake valve VWIVN-1001S STD

30.80
Product detailed specification Model number VWIVN-1001S Head diameter 33.00mm Stem diameter 5.98mm Length 103.90mm Material Black nitrided stainless steel Fits

VW R32 7.5kg 240mm steel flywheel for 6-speed gearboxes

383.89
Direct replacement Single-mass flywheel made from Alloy steel (16MnCr5). Used with 6 gang gearboxes and original or aftermarket clutch kit.

VW R32 VR6 Sachs performance RCS200 Sinter 4-pad clutch kit

2,198.90
Single-mass flywheel made from Alloy steel (16MnCr5) designed to work with Sachs Performance RCS200 clutch kit. Transmittable torque: up to

VW Rabitt / Audi TT RS 2.5 20V TFSI Supertech valve spring kit SPRK-A2416-5

577.49
Spring data: Seat pressure – 73lbs @ 38.60mm (intake), 85lbs @ 37.20mm (exhaust) Open (lift) pressure – 178lbs @ 10mm

VW Rabitt / Audi TT RS 2.5 20V TFSI Supertech valve spring set SPR-A2416-5

412.49
Spring data: Seat pressure – 73lbs @ 38.60mm (intake), 85lbs @ 37.20mm (exhaust) Open (lift) pressure – 178lbs @ 10mm

VW VR6 2.8 2.9 12V Supertech valve spring and retainer kit SPRK-V2093-4-12

506.00
Spring data: Seat pressure – 77lbs @ 33.00mm Open (lift) pressure – 229lbs @ 12.00mm Spring coil bind – 18.7/15.3mm

Walbro genuine fuel pump 255LPH GSS342 + fitting kit

104.50
Walbro part number: GSS342 (includes full install kit) Type: universal electric in-tank fuel pump Fuel: gasoline Flow rate: 255LPH Noise

Walbro genuine fuel pump 450LPH E85 + fitting kit

165.00
Walbro Part Number: F90000267 (includes full install kit) Type: Universal in-tank fuel pump Fuel: Gasoline / E85 Flow Rate: 450LPH Outer diameter (small):

Walbro genuine fuel pump 525LPH E85

196.89
Enjoy the highest output on today’s market with Walbro’s new DCSS 39/50 in-tank fuel pump. Able to support an aggressive

Walbro Motorsport BKS1001 Brushless Fuel Pump & Controller kit

878.89
IN-TANK BRUSHLESS DESIGN PACKED WITH POWER TI Automotive BKS1001 Brushless Pump and Controller Kit TI Automotive’s new in-tank brushless fuel

Weber Pico injector 215cc, C, 15 Ohm, JET, O-O 34 mm, IWP048

108.89
Maximum flow approx 215cc @ 3 bar Short type injector (O-ring distance is 34 mm) replaces short injector Compatible with