Showing 1041–1080 of 2042 results

EV14, 630 cc, 12 Ohm, C15, USCAR, long spray tip, O-O 49 mm, modified.

61.59
Maximum flow approx 630cc @ 3 bar Mid lenght type injector (O-ring distance is 49 mm), long spray tip Compatible

EV14, 630 cc, 12 Ohm, C15, USCAR, O-O 61 mm, modified.

67.09
Maximum flow approx 620cc @ 3 bar Long type injector (O ring distance is 61 mm) replaces long injector Compatible

EV14, 640 cc, 12 ohm, C15, O-O 34 mm “short”, USCAR-connector.

75.89
Maximum flow approx 640cc @ 3 bar Short type injector (O-ring distance is 34 mm) replaces short injector Compatible with

EV14, 700 cc, 12 Ohm, C, USCAR, long O-O 61 mm

60.32
Maximum flow approx 700cc @ 3 bar Long type injector (O-ring distance is 49 mm) replaces long injector Compatible with

EV14, 731 CC ,12 ohm, C, USCAR, O-O 34 mm (Bosch 0280158290, 028)

70.39
Maximum flow approx 731cc @ 3 bar Short type injector (O-ring distance is 34 mm) replaces short injector Compatible with

EV14, 850 cc, C15, 12 ohm, O-O 34 mm “short”, USCAR connector

97.89
Maximum flow approx 850cc @ 3 bar Short length type injector (O-ring distance is 34 mm) replaces short injector Compatible

EV14, 850 CC, C15, 12 ohm, USCAR, O-O 61 mm “long”

80.29
Maximum flow approx 850cc @ 3 bar Long type injector (O-ring distance is 61 mm) replaces long injector Compatible with

EV4 injector, 14 ohm, 233cc, E 19°, Delta 40, Jetronic, O-O 61 mm

80.59
Maximum flow approx 233cc @ 3 bar Long type injector (O-ring distance is 61 mm) replaces long injector Compatible with

EV6, 15 Ohm, 571cc, E, O-O 49 mm (mid), total 62 mm

99.94
Maximum flow approx 571cc @ 3 bar Mid length type injector (O-ring distance is 49 mm) replaces mid length injector

EV6, Bosch injector, 443 cc, E 20°, Jetronic, O-O 61mm, tot 74mm

66.39
Maximum flow approx 443cc @ 3 bar Long type injector (O-ring distance is 61 mm) replaces long injector Compatible with

Facet 480532 Red Top Cylindrical Fuel Pump, 151 L/h

120.99
Fuel Union Installation:- When fitting fuel unions, either wrap PTFE tape around the threads or use Loctite 243 to create

FCP 6mm lash cap for solid lifter

4.40
Part number FCPLC/6mm. FCP Engineering lash cap used with solid lifter. hardness HRC 55, inner diameter 6mm, over deck 5mm.

FCP 7mm lash cap for solid lifter

4.40
Part number FCPLC/7mm. FCP Engineering lash cap used with solid lifter. hardness HRC 55, inner diameter 7mm, over deck 5mm.

FCP Engineering VAG 1.8-2.0 16V Performance camshaft set

632.50
Duration: 288/288° Peak timing: 108° Valve lift (mm): 11.2/11.2 Lift at TDC (mm): 2.0/2.0 Power band – 3000-7500 RPM Works

FCP Engineering VAG 1.8T 20V Performance camshaft set

603.89
Duration: 256°/264° Peak timing: 112° Valve lift (mm): 8.0/10.4 Lift at TDC: 0.4/0.7

FCP forged crankshaft for Mitsubishi Evo 4-9 4G63 (7-bolt)

548.89
New forged FCP Engineering crankshaft for Mitsubishi 4G63 (7-bolt) Made from 4340 forged steel Weight 15.4kg

Fiat / Lancia Integrale 2.0 16V Wiseco pistons CR 8.5 84.5mm KE219M845

801.89
Product detailed specification Bore size 84.50mm Stroke 90.00mm Wiseco compression ratio (CR) 8.5:1 OEM compression ratio (CR) 8.0:1 Dome volume

Fiat / Lancia Integrale 2.0 16V Wiseco Pistons CR 8.5 85.5mm KE219M855

801.89
Product detailed specification Bore size 85.50mm Stroke 90.00mm Wiseco compression ratio (CR) 8.5:1 OEM compression ratio (CR) 8.0:1 Dome volume

Fiat / Lancia Integrale 2.0 16V Wiseco Pistons CR 8.5 85mm KE219M85

801.90
Product detailed specification Bore size 85.00mm Stroke 90.00mm Wiseco compression ratio (CR) 8.5:1 OEM compression ratio (CR) 8.0:1 Dome volume

Fiat 1.4 1.6 16V Turbo FCP H-beam steel connecting rods 128.52mm

438.89
Product detailed specification Manufacturer: FCP Engineering Model: FCPRHF12852486322 Profile: H-beam C to C: 128.52mm Big end diameter: 48.63mm Pin diameter:

Fiat 1.4 Turbo 146 A8.000 Athena MLS cylinder head gasket 82.5×1.3mm 338006R

137.50
Athena Racing 338 series multilayer steel (MLS) cylinder head gasket. Athena MLS gaskets are designed to suit the requirements of

Fiat 500 Abarth 1.4 16V Turbo FCP H-beam forged steel connecting rods 129mm

438.89
Product detailed specification Manufacturer: FCP Engineering Model: FCPRHF1294518 Profile: H-beam C to C: 129.00mm Big end diameter: 45.11mm Pin diameter:

Fiat Coupe 2.0 20V Turbo 175 A3.000 FCP H-beam steel connecting rods 145mm

592.90
Product detailed specification Manufacturer: FCP Engineering Model: FCPRHF14551322 Profile: H-beam C to C: 145mm Big end diameter: 51.30mm Pin diameter:

Fiat Coupe Turbo 20V 175A3 / 182A1 JE Pistons kit 82.50mm CR 8.0 312404

1,098.90
Product detailed specification Bore size 82.50mm Stroke 75.60mm JE Pistons compression ratio (CR) 8.0:1 OEM compression ratio (CR) 8.5:1/10.5:1 Dome

Fiat Punto S2000 2.0 Athena MLS cylinder head gasket 85.8×0.85mm 338408R

154.00
Athena Racing 338 series multilayer steel (MLS) cylinder head gasket. Athena MLS gaskets are designed to suit the requirements of